Walkway & Entrance Canopies
Entrance Drop-off Canopy
A vehicle drop-off canopy at a building entrance, sized for the turning circle and the height of the vehicles expected.
Specifications →Home › Car Park Shades › Walkway & Entrance Canopies › Cantilever Walkway Canopy
Cantilever Walkway Canopy
A covered pedestrian route supported from one side, keeping the walking surface completely free of columns.
| Projection | 3 m – 6 m |
|---|---|
| Length | In 3 m or 6 m modules |
| Clear height | 2.4 m – 3 m |
| Structure | Hot-dip galvanised steel, powder coated |
| Covering | PVC membrane, polycarbonate or aluminium panel |
| Drainage | Concealed gutter and downpipe |
| Fire rating | DIN 4102 B1 / M2 flame retardant |
| Fixings | Hot-dip galvanised steel base plates and connectors |
Figures are indicative for the standard system. Span, height and wind loading are confirmed per project against the site survey before order.
Why this system
Where it works
- No columns in the walking route — important for accessibility and cleaning.
- Links buildings, car parks and entrances under continuous cover.
- Polycarbonate options allow daylight through while blocking heat.
Supplied as
Rental or manufacture
This structure is available both ways. On rental it arrives with the crew, is installed, maintained for the hire period and dismantled. Manufactured, it is built to your dimensions, anchored to a prepared base and handed over with the anchor and load details.
Anchoring is chosen for the ground: ballast weights or ground plates on asphalt and paving, cast-in bolts where a foundation exists or can be poured.
Also consider
Related structures
Clear Span Structures
Clear Span Structure Tent
A modular column-free aluminium frame that carries its entire roof load through the eave legs, leaving the full internal width usable.
Specifications →
Clear Span Structures
Double Decker Structure
A two-storey clear-span structure that doubles usable area on a constrained footprint.
Specifications →