Home › Car Park Shades › Cantilever Car Shades › Single Cantilever Car Shade

Single Cantilever Car Shade

Name: Single Cantilever Car Shade
Availability: InStock

A single row of parking bays covered from one side, with the column line set behind the vehicles. Nothing obstructs the parking bay or the door swing.

Single Cantilever Car Shade — cantilever car shades supplied on rental or manufactured to order in Riyadh — Product visualisation — dimensions confirmed per project.

Dimensioned elevation drawing of a single cantilever car shade — Dimensioned elevation. Figures are confirmed per project.

Indicative specification
Bay coverage	Single row
Projection	5 m – 6.5 m
Module width	2.5 m – 3 m per bay
Clear height	2.2 m – 2.6 m at the leading edge
Structure	Hot-dip galvanised steel, powder coated
Covering	PVDF-coated PVC membrane or HDPE shade mesh
Design wind speed	Site-specific calculation
Fire rating	DIN 4102 B1 / M2 flame retardant
Fixings	Hot-dip galvanised steel base plates and connectors

Figures are indicative for the standard system. Span, height and wind loading are confirmed per project against the site survey before order.

Request a quote Available on rental

Why this system

Where it works

Columns sit behind the bay, so no post obstructs parking or door opening.
Bolted to a concrete foundation designed for the local wind uplift.
Membrane or mesh covering depending on required shade factor and budget.
The standard configuration for perimeter parking against a boundary wall.

Supplied as

Rental or manufacture

This structure is available both ways. On rental it arrives with the crew, is installed, maintained for the hire period and dismantled. Manufactured, it is built to your dimensions, anchored to a prepared base and handed over with the anchor and load details.

Anchoring is chosen for the ground: ballast weights or ground plates on asphalt and paving, cast-in bolts where a foundation exists or can be poured.

How we fabricate →

Also consider